Check the connection between the machine and various accessories (including probes, image processing instruments, etc.). It should be correct and reliable, and the recorder should be loaded with recording paper.
Turn on the main power switch and observe the indicators. The system performs a self-test and waits until the screen displays normally. Set the correct time, date, patient type and various parameters and functions. Check the probe, adjust the sensitivity, delay time, and icon measurement and other parameters are in the normal range, everything can be enabled.
Ultrasonic couplant should be applied, pay attention to the probe in close contact with the site under inspection. Avoid the effects of bubbles and voids on the image.
The instrument should be used and operated by a qualified medical staff. You must be familiar with the performance and use of color ultrasound machines, the use methods and the normal values of various medical physiological parameters.
The cause of the abnormality of the instrument should be analyzed. If it is due to operational reasons, measures should be taken to eliminate the fault in a timely manner; if the fault of the machine itself cannot be ruled out, the engineer in the equipment department should be notified for repair.
Plug the power cord into a power outlet, and then turn on the monitor and host power switches. After turning on the monitor, adjust the brightness or contrast of the monitor to the optimal state, let the patient lie on his back, apply coupling agent to the patient’s area to be checked, and place the probe in close contact with the area to be checked. By changing the direction and tilt of the probe, observe the Image of the desired section.
Post time: Feb-17-2023
